How do I replace the fittings on the rotary tiller blades?

Changing the fittings on the rotary tiller blades is one of the operations that farmers often need to carry out in their daily farming. Before replacing an accessory, you need to make preparations, including checking the status of the accessory, preparing the appropriate tools and spare parts, etc. Next, the steps to replace the rotary tilling blade accessories will be introduced in detail from the three aspects of preparation, replacement process and precautions.

1. Preparation

First, disassemble the rotary tiller and place the rotary tiller blades on a flat workbench or ground. Clean up dirt and debris around the plow blade to ensure safe operation. Check the degree of wear of the plough blades and the condition of the fittings, and identify the fittings that need to be replaced.

Prepare the tools you need, usually basic tools such as wrenches, hammers, screwdrivers, etc. At the same time, spare new parts are ready to ensure a smooth replacement. It is recommended to use original parts or parts with guaranteed quality to ensure that the replaced plow blades can work properly.

2. Replacement process

First, use a wrench to unscrew the nut or bolt that holds the plow blade in place and disassemble the original fitting. Pay attention to the careful operation during the disassembly process to avoid injury or damage to other parts.

After removing the old parts, compare the old parts with the new ones to make sure that the size and shape are consistent. Install the new fitting on the plow blade, taking care to make sure that the fitting is installed in the correct position and fixing the screws or bolts.

Once the new fitting is installed, tighten the nut or bolt with a wrench to make sure the fitting is securely fastened. Then check for other debris around the plough blade, and then reassemble the rotary tiller after cleaning.

3. Precautions

When replacing the rotary tillage blade accessories, it is important to pay attention to the safety of operation to avoid injury. Use caution when using the tool to avoid damaging other parts. Pay attention to the condition of the plow blades and accessories during operation to ensure that they are installed correctly.

You can apply some lubricating oil or anti-rust oil before replacing the accessories to prolong the service life of the accessories. After replacing the accessories, it is recommended to test the rotary tiller and confirm that there is no abnormal situation before carrying out normal operation.

Overall, replacing rotary tiller blade accessories is not complicated, as long as you do your homework, operate carefully, and pay attention to the selection and installation of accessories, the replacement process can be completed smoothly. I hope the above introduction is helpful to you, and I wish you all the best in your farming!